Network 'bblv' is not active

Network 'bblv' is not active

It may be an overlap of IP addresses. The internal network for the antlets (10.1.1.x by default) must be a unique network - different than the LAN your antsle is connected to. 

If these networks are the same, run the baseip script, from the antsle's command line, to change the antlet's network with:

    antsleOS-baseip set x.x.x.

replacing x.x.x. with a unique network address. Note, include the last '.'

There are several ways to get to the antsle's command line (terminal).



    • Related Articles

    • antHill cannot find or activate your antsle

      Here is a series of videos for trouble shooting anthill activation in our docs: https://docs.antsle.com/tshoot/#anthill-activation-cant-find-antsle Here are some of the steps from the video: Is your ethernet cable plugged into the correct ethernet ...

    • Cannont access antMan using 'antsle_name.local' from a browser

      Power Is the red power led on, on the front of the antsle? Ethernet connection Is your ethernet cable plugged into the correct ethernet port?:  http://docs.antsle.com/setup/#2-connect-power-and-network Is there a link light on the ethernet port and ...

    • RDP stops working after Windows update

      RDP connection, as well as ssh, stopped working to a Windows 10 antlet after one of the Windows automatic updates. Use the vncConsole (click the icon next to the antlet name in antMan) to access the Windows desktop. Windows is prompting to "allow ...

    • The antsle cannot communicate with the public internet

      This can happen if the antsle does not acquire an IP from DHCP but is typically a misconfigured default gateway or DNS server address.  If you configured a static IP, you also need to set the default gateway and dns server addresses in antMan > ...